Solo

Solo Faucets for Practical and Coordinated Bathroom Design

Choosing bathroom taps involves balancing daily usability, installation requirements and the overall appearance of the space. The Solo faucets collection by Jaquar includes single lever basin mixers, basin taps, bath and shower mixers, shower mixers, concealed valve components and supporting fittings.

These products can be considered for different bathroom layouts, from a straightforward basin installation to a combined bath and shower area. The collection also includes configurations with different waste arrangements and shower-related components, making it important to review each product according to its intended use.

A good selection begins with the installation itself. Check the basin or bath dimensions, the mounting arrangement and the plumbing connections before deciding on the fitting. Then consider how the finish and design relate to the surrounding products.

Explore the wider faucet collection to compare options for different areas of the bathroom.

Solo Basin Mixers

The basin mixer is an important part of the everyday handwashing area. It should be compatible with the basin and provide convenient access to the controls while directing water appropriately into the bowl.

Single Lever Basin Mixer

The Solo collection includes a single lever basin mixer. This type of fitting provides a single control point for adjusting water flow and temperature.

When choosing a single lever mixer, consider the basin's dimensions, mounting type and tap-hole arrangement. The outlet should reach the basin appropriately, while the handle should have enough space to operate without contacting a wall, mirror or nearby fitting.

A mixer that is too high, too low or poorly aligned with the basin may be less comfortable to use. Review the product dimensions and compare them with the basin before purchase.

Basin Mixer with Click-Clack Waste

The collection includes a single lever basin mixer with click-clack waste. This configuration can be considered when the basin installation requires a push-operated waste mechanism.

The waste should be compatible with the basin opening and the selected installation. Confirm the product description to understand what is included and whether additional parts are needed.

If the project involves replacing an existing tap, inspect the current waste arrangement before choosing a replacement. Matching the mixer and waste requirements can help avoid compatibility issues during installation.

Basin Mixer with Popup Waste

Solo also includes a single lever basin mixer with popup waste. This version is suited to an installation that uses a compatible popup waste mechanism.

Popup and click-clack systems have different operating arrangements. The appropriate option depends on the basin and the required waste configuration. Confirm the product details and the basin's specifications before ordering.

When specifying a basin mixer, consider the tap and waste together rather than selecting them independently. This is especially useful when the basin has a particular mounting arrangement or when existing plumbing components are being retained.

Basin Taps

The Solo collection also includes a basin tap. A basin tap should be selected according to its intended connection, mounting arrangement and use.

Before choosing a basin tap, check whether the installation requires a tap rather than a single lever mixer. Confirm the relevant connection size and installation requirements in the product documentation. The existing plumbing arrangement may influence whether a particular fitting can be installed without modification.

Explore the available sanitaryware to coordinate the tap with the basin design.

Solo Bath and Shower Mixers

The Solo collection includes single lever bath and shower mixers, including a configuration offered with a shower kit. These fittings can be considered for a combined bath and shower installation, provided the selected product matches the plumbing arrangement.

Single Lever Bath and Shower Mixer

A single lever bath and shower mixer provides one point of control for water flow and temperature. The selected fitting should match the outlets and plumbing connections required by the bathing area.

Before purchase, establish whether the installation serves a bathtub, a shower or both. Review the position of the controls, the bath spout and the shower outlet to ensure that the selected mixer is suitable for the system.

The technical documentation should be used to confirm the installation method and any additional components needed to complete the setup.

Bath and Shower Mixer with Shower Kit

The collection includes a bath and shower mixer configuration with a shower kit. This option can be considered when planning the mixer and shower-related fittings together.

Check the full product description to determine which components are included. The supplied items may differ from those provided with a mixer-only configuration, so confirm whether any additional shower accessories are required.

Consider the location of the hand shower holder, the reach of the hose and the available space around the bathtub. These details affect how comfortably the system can be used.

For a coordinated bathing area, review the available shower fittings and confirm compatibility with the selected mixer.

Solo Shower Mixers

Solo includes several single lever shower mixer configurations for different installation requirements. These should be evaluated according to their intended application, mounting method and connection arrangement.

Choosing an Exposed Shower Mixer

An exposed shower mixer has its visible control and connection components installed on the finished wall. It may be considered where the plumbing layout supports the product's installation requirements.

Before choosing a model, check the water connection positions and the type of shower fitting it is intended to serve. The location of the controls should allow convenient operation while remaining accessible within the shower area.

The selected mixer should be compatible with the shower pipe, hand shower or other components required by the installation. Review the product description rather than assuming that every shower mixer includes the same accessories.

Planning a Concealed Shower Installation

The Solo range includes components for concealed in-wall manual valves and diverters. These products require particular attention to compatibility because the visible trim and the concealed valve body may be supplied separately.

Before selecting a concealed fitting, establish the intended control function and confirm the compatible in-wall component. Check the installation depth, connections and outlet arrangement before the wall is completed.

A concealed installation should be planned early in the project. Once tiling is complete, changing the in-wall components can require additional work. Confirm the full system requirements before ordering.

Supporting Fittings and Angle Valves

Supporting fittings are part of the plumbing arrangement, even when they are less prominent than the basin mixer or shower controls.

The Solo range includes angle valves, including a version described as an angle valve for hot water with wall flange. The correct valve depends on the intended connection and the plumbing requirements.

An angle valve should not be selected as a substitute for a basin mixer or shower control. Its purpose and connection requirements are different. Check the product documentation and consult a qualified installer if the required connection is unclear.

When planning the complete installation, account for all necessary valves and supporting components instead of focusing only on the visible fittings.

Selecting the Right Solo Faucet for Your Bathroom

Different applications require different faucet configurations. Use the intended location as the starting point for your selection.

For Basin Areas

Check the basin's mounting arrangement, tap-hole position and dimensions. Decide whether a single lever mixer or basin tap is appropriate, then confirm the waste configuration.

For Bathtubs

Determine whether a bath and shower mixer is required. Review the outlet arrangement and establish whether a shower kit is included or needs to be selected separately.

For Shower Areas

Compare the available shower mixer configurations and confirm the intended mounting type. If concealed components are required, verify the compatible in-wall valve or diverter before completing the wall.

For Supporting Connections

Review any angle valves or additional fittings required by the plumbing layout. Confirm their intended use and compatibility before installation.

Choosing a Finish

The finish should work with the basin, shower fittings, accessories and surrounding surfaces. Solo product listings include chrome-finish options, with availability depending on the selected product.

Chrome can be considered for a consistent appearance where other visible fittings use a similar reflective finish. When coordinating products, check the exact finish available for each item rather than assuming that all products in the collection share the same finish options.

The choice of finish should follow the functional selection. First confirm that the fitting is suitable for the installation, then choose the appearance that complements the room.

Solo Faucet Buying Checklist

Before ordering, check the following:

• Intended application: Confirm whether the product is for a basin, bath, shower or supporting plumbing connection.
• Mounting type: Verify the required deck-mounted, wall-mounted or concealed arrangement.
• Basin compatibility: Check the tap height, reach and mounting configuration.
• Waste arrangement: Choose the appropriate click-clack or popup waste where required.
• Shower requirements: Confirm the intended outlets and whether a shower kit is included.
• Concealed components: Verify the matching in-wall valve or diverter.
• Supporting fittings: Identify any additional valves or connection components needed.
• Finish: Confirm the available finish for the selected product.
• Technical documentation: Review the dimensions, connections and installation requirements.

Coordinating Solo with Other Bathroom Products

A coordinated bathroom starts with a clear layout. Select the basin, bathtub and shower arrangement, then choose fittings that suit the practical requirements of each area.

The Solo collection offers several options for basin and bathing applications, but the products should not be assumed to be interchangeable. Their mounting methods, connections and intended functions need to be checked individually.

Review the available bathroom products and sanitaryware to coordinate the visible elements of the room. Confirm compatibility across the selected fittings before installation.

A Considered Approach to Everyday Bathroom Fittings

The right faucet should be selected for its intended application, not simply for its appearance. Basin mixers need to suit the basin, bath and shower mixers must match the plumbing arrangement, and concealed fittings require compatible in-wall components.

Solo provides different configurations to consider when planning these areas. Compare the product descriptions and technical information, verify the installation requirements and choose the fittings that suit your layout.

By planning the products together and confirming compatibility before purchase, you can create a bathroom that is coordinated in appearance and practical for everyday use. Always consult the current product documentation for final specifications and installation guidance.